K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-2470 crankcase vent filter has a K&N embossed chrome top and chrome base. The 5/16 inch flange is designed to clamp on to metal or plastic tubing where venting is needed. This air filter is constructed with a non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1495 crankcase vent filter has a K&N embossed chrome top with a rubber base. This filter is designed to screw directly into threaded Ford valve covers. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1340 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The 5/8 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1560 crankcase vent filter has a K&N black rubber top and rubber base. The filter is 1-1/8 inches tall, 1-3/8 inches in outside diameter with a 3/4 inch flange which is designed to clamp directly on to metal or plastic tubing. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1410 crankcase vent filter has a black rubber top and base. The filter is 2-3/8 inches tall, 3 inches in outside diameter with a 1 inch flange which is designed to push on to the existing rubber breather grommets. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1380 crankcase vent filter has a black rubber top and base. The filter is 2-1/2 inches tall, 3 inches in outside diameter with a 1-1/4 inch inside diameter flange which is designed to clamp onto a vent tube or outlet. Constructed with a cotton filter media it can be cleaned and reused repeatedly. A 14.79 milliliter pillow-pack of air filter oil included. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1390 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The filter is 2-1/2 inches tall, 3 inches in outside diameter with a 1-1/4 inch flange which is designed to push on to the existing rubber breather grommets. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1440 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The filter is 2-1/2 inches tall, 3 inches in outside diameter with a 1-3/8 inch flange which is designed to push on to the existing rubber breather grommets. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1430 crankcase vent filter has a black rubber top and base. The filter is 2-1/2 inches tall, 3 inches in outside diameter with a 1-3/8 inch flange which is designed to push on to the existing rubber breather grommets. Constructed with a cotton gauze filter media it can be cleaned and reused repeatedly. A 14.79 milliliter pillow-pack of air filter oil is included. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1513 crankcase vent filter has a K&N embossed chrome top, rubber base and comes with a deflector shield to protect against engine heat. The 1-3/8 inch inside diameter rubber flange is designed to clamp directly onto metal or plastic tubing where venting is needed. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1460 crankcase vent filter has a K&N embossed chrome top with a rubber base. The 1-1/2 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1450 crankcase vent filter has a K&N embossed rubber top with a rubber base. The 1-1/2 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a non-woven synthetic filter media it can be cleaned and reused and is covered under K&N's One Year Limited Warranty. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1514 crankcase vent filter has a K&N embossed chrome top, rubber base and comes with a deflector shield to protect against engine heat. The 1-1/2 inch inside diameter rubber flange is designed to clamp directly onto metal or plastic tubing where venting is needed. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1470 crankcase vent filter has a K&N embossed rubber top with a rubber base. The 1-3/4 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1480 crankcase vent filter has a K&N embossed chrome top with a rubber base. The 1-3/4 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1360 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The 1 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.