The 63-2610 cold air intake system is engineered specifically for some Ford F150 V8 5.0L models, and includes a larger than stock fresh air scoop behind the front grill to increase airflow to the high-performance enclosed air box filter assembly. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. The included washable, reusable High-Flow Air Filter features oiled cotton filter media, and the oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and allows for quick access to the filter. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits:

Year	Make	Model	Submodel
2015-2020	Ford	F-150	King Ranch
2015-2020	Ford	F-150	Lariat
2015-2020	Ford	F-150	Platinum
2016-2020	Ford	F-150	SSV
2015-2020	Ford	F-150	XL
2015-2020	Ford	F-150	XLT

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits:

Year	Make	Model	Submodel
2019-2023	Ford	Ranger	Lariat
2019-2023	Ford	Ranger	XL
2019-2023	Ford	Ranger	XLT

This cold air intake system is engineered specifically for some Ford F150 V8 5.0L models, and includes a larger than stock fresh air scoop behind the front grill to increase airflow to the high-performance enclosed air box filter assembly. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. The included washable, reusable High-Flow Air Filter features oiled cotton filter media, and the oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and allows for quick access to the filter. The entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits:

Year	Make	Model	Submodel
2021-2023	Ford	F-150	King Ranch
2021-2024	Ford	F-150	Lariat
2021-2023	Ford	F-150	Platinum
2021-2024	Ford	F-150	SSV
2024	Ford	F-150	STX
2023-2024	Ford	F-150	Tremor
2021-2024	Ford	F-150	XL
2021-2024	Ford	F-150	XLT

The K&N 69-8751TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Corolla models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8751TR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive red powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

K&N's APOLLO CIS is a universal "Cold Air Intake System". The Apollo's specially designed shape increases volumetric efficiency and is made of durable lightweight material for cooler air intake. The Apollo incorporates a K&N famous cotton gauze filter which is removable for periodic cleaning and provides the benefits of an open cone filter and standard air box in one unit. Heat buildup is reduced which keeps the intake charge cool. Smooth internal features minimize air turbulence and maximize air flow. The Apollo is ideal for normally aspired engines up to 250BHP and turbo engines up to 350BHP. It comes with a standard 70mm base flange with a range of optional stepped adapters available to allow fitment to other intake sizes.

K&N's Universal Off-road In-line Air Intake System, part 54-6853, was designed for extreme off-road racing. From side-by-sides to full race trucks, this kit can be used on a variety of off-road applications. The washable conical K&N air filter has six layers of cotton gauze for outstanding protection in off-road conditions. In addition, a foam wrap pre-filter is included to further extend the service life of the K&N air filter. The air intake housing is a cylindrical canister for rugged protection which allows excellent airflow in harsh off-roading environments. It can be mounted using the included hardware for a complete install. We also include two velocity stacks, a 3.5 inch and 4 inch adaptor, to make fitment on your application easy.

Perrin 08-14 Subaru WRX/STI / 08-15 STI Neon Yellow Cold Air Intake

Perrin 08-14 WRX / 08-15 STI Cold Air Intake - Hyper Pink

Perrin 15-19 Subaru WRX Neon Yellow Cold Air Intake

Perrin 16-17 Subaru WRX STI Red Cold Air Intake

Perrin 18-21 Subaru STI Cold Air Intake - Black

Perrin 18-21 Subaru STI Cold Air Intake - Neon Yellow

Perrin 18-21 Subaru STI Cold Air Intake - Red

Perrin 2015+ Subaru WRX Cold Air Intake - Hyper Pink

Perrin 22-23 Subaru BRZ/GR86 Cold Air Intake - Black

Perrin 22-23 Subaru BRZ/GR86 Cold Air Intake - Hyper Pink