Put an end to the loud clanging and banging of your d-ring shackles for good AND look great doing it! Rugged Ridge D-Ring Isolators are designed to isolate all portions of recovery shackles from contacting your bumper, virtually eliminating the obnoxious noise from your off-road rig. Molded of energy-absorbing polyurethane, these D-ring isolators easily snap over the outer perimeter of your shackle providing complete protection from contact with nearby surfaces while the included urethane washers isolate between the shackle pin and the mounting tab for total coverage. Rugged Ridge D-Ring isolators are available for both 3/4 and 7/8 in. shackles and are molded in a variety of colors to suit your individual tastes or paint scheme: Black, Red, Green, Yellow and, yes, Pink. (Sold in pairs- 2 isolators / 4 washers)

This 3/4- in. D-Ring Shackle from Rugged Ridge is rated to 9,500 lbs. with a screw-pin design making them essential for effective vehicle recovery. Constructed of high-strength forged steel and Pink powder-coated, these d-ring shackles are built to deliver in off-road conditions while looking good doing it. No recovery gear kit is complete without a set of D-rings, suitable for temporary connections of straps, snatch blocks and pulleys for safe and efficient vehicle recovery. Keep an extra set on hand so you are equipped for anything. Sold individually.

Rear Side Grab Handles offer easy entry and exit attach directly into factory mounting holes with your original hardware. They also double as Front Seat Grab Handles by easily attaching to the windshield pillar with supplied hardware.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport

Three styles to choose from, Rear Side Grab Handles for easy entry and exit attach directly into factory mounting holes with your original hardware. They also double as Front Seat Grab Handles by easily attaching to the windshield pillar with supplied hardware. Rear Seat Grab Handles attach to the head rest of your JK front seats. Finally, we have developed a Neoprene Wrapped design for over driver and passenger that completes the entire JK package!

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport

Looking for an accessory to carry your bike rack? Rugged Ridge has you covered with this black 2-inch receiver hitch kit that includes harness and Jeep plug. Designed as a one-piece welded assembly for added strength, we built our hitch receiver to match the towing capacity of your Jeep Wrangler. The custom design bolts directly to factory mounting points on the rear of the vehicle. The powder coated construction sheds water and provides a long lasting rust free finish. Includes cutout for factory wiring harness mounting. Not to exceed recommended vehicle towing capacity. Refer to your owner's manual for detailed information on your vehicle's towing capacity.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Custom design bolts directly to factory mounting points on the rear of the vehicle, very similar design to the OE Receiver Hitch. Durable powder coat design sheds water and provides a long lasting rust free finish. Includes cutout for factory wiring harness mounting. Designed as a one-piece welded assembly for added strength, we built our hitch receiver to match the towing capacity of your Jeep: 3,500-lb tow rating, 350-lb tongue weight rating with weight distributing equipment; otherwise 2000-lb tow rating, 200-lb tongue weight rating, 2 in. opening.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Jeep Wrangler JL owners can benefit from this simple, bolt-on trailer hitch solution from Rugged Ridge. This Receiver Hitch Kit w/ Wiring Harness delivers 3,500 lb. towing capacity with a 350 lb. tongue weight, comparable to those dealer-installed hitches without that dealer price tag. This hitch utilizes a sturdy one-piece welded design for added strength while the accompanying harness features correct gauge wires and factory-style connectors for a simple, trouble-free installation and long service life. Installation

This Part Fits:

Year	Make	Model	Submodel
2021	Jeep	Wrangler	80th Anniversary
2021,2023	Jeep	Wrangler	Freedom
2021	Jeep	Wrangler	Islander
2018-2024	Jeep	Wrangler	Rubicon
2024	Jeep	Wrangler	Rubicon X
2018-2024	Jeep	Wrangler	Sport
2018-2024	Jeep	Wrangler	Sport S
2021	Jeep	Wrangler	Unlimited 80th Anniversary
2021,2023	Jeep	Wrangler	Unlimited Freedom
2021-2023	Jeep	Wrangler	Unlimited High Altitude
2021-2024	Jeep	Wrangler	Unlimited High Altitude 4xe
2022-2023	Jeep	Wrangler	Unlimited High Tide
2021	Jeep	Wrangler	Unlimited Islander
2018-2019	Jeep	Wrangler	Unlimited Moab
2018-2024	Jeep	Wrangler	Unlimited Rubicon
2021-2024	Jeep	Wrangler	Unlimited Rubicon 392
2021-2024	Jeep	Wrangler	Unlimited Rubicon 4xe
2024	Jeep	Wrangler	Unlimited Rubicon X
2018-2024	Jeep	Wrangler	Unlimited Sahara
2021-2024	Jeep	Wrangler	Unlimited Sahara 4xe
2021-2023	Jeep	Wrangler	Unlimited Sahara Altitude
2018-2024	Jeep	Wrangler	Unlimited Sport
2021-2023	Jeep	Wrangler	Unlimited Sport Altitude
2018-2024	Jeep	Wrangler	Unlimited Sport S
2021-2024	Jeep	Wrangler	Unlimited Willys
2023-2024	Jeep	Wrangler	Unlimited Willys 4xe
2021-2024	Jeep	Wrangler	Unlimited Willys Sport
2021-2024	Jeep	Wrangler	Willys
2021-2024	Jeep	Wrangler	Willys Sport
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Rugged Ridge Premium Recovery Straps are a must for any off-road enthusiast, and are available in a variety of sizes to best suit your needs. Our heavy-duty straps are constructed with durable mildew proof nylon and abrasion resistant reinforced eyes. Nylon absorbs the shock of heavy pulls better than polyester, and its elastic properties help aid in a quicker recovery. The Rugged Ridge Tree Protector helps you tread lightly and keeps the trails open for everyone. The protector wraps around the base of the tree to prevent you from damaging your winch cable or the tree during your recovery operation. Recovery Straps are available in the following sizes: 2x30' 20,000lbs, 3x30' 30,000lbs, 4x30' 40,000lbs. Tree Trunk Protector: 3x6' 30,000lbs

Rugged Ridge Premium Recovery Straps are a must for any off-road enthusiast, and are available in a variety of sizes to best suit your needs. Our heavy-duty straps are constructed with durable mildew proof nylon and abrasion resistant reinforced eyes. Nylon absorbs the shock of heavy pulls better than polyester, and its elastic properties help aid in a quicker recovery. The Rugged Ridge Tree Protector helps you tread lightly and keeps the trails open for everyone. The protector wraps around the base of the tree to prevent you from damaging your winch cable or the tree during your recovery operation. Recovery Straps are available in the following sizes: 2x30' 20,000lbs, 3x30' 30,000lbs, 4x30' 40,000lbs. Tree Trunk Protector: 3x6' 30,000lbs

Put an end to the loud clanging and banging of your d-ring shackles for good AND look great doing it! Rugged Ridge D-Ring Isolators are designed to isolate all portions of recovery shackles from contacting your bumper, virtually eliminating the obnoxious noise from your off-road rig. Molded of energy-absorbing polyurethane, these D-ring isolators easily snap over the outer perimeter of your shackle providing complete protection from contact with nearby surfaces while the included urethane washers isolate between the shackle pin and the mounting tab for total coverage. Rugged Ridge D-Ring isolators are available for both 3/4 and 7/8 in. shackles and are molded in a variety of colors to suit your individual tastes or paint scheme: Black, Red, Green, Yellow and, yes, Pink. (Sold in pairs- 2 isolators / 4 washers)

This pair of 3/4- in. D-Ring Shackles from Rugged Ridge is rated to 9,500 lbs. with a screw-pin design making them essential for effective vehicle recovery. Constructed of high-strength forged steel and Red powder-coated, these d-ring shackles are built to deliver in off-road conditions while looking good doing it. No recovery gear kit is complete without a set of D-rings, suitable for temporary connections of straps, snatch blocks and pulleys for safe and efficient vehicle recovery. Keep an extra set on hand so you are equipped for anything. Sold in pairs.

Rugged Ridge replacement tops use only the finest vinyl coated polyester. A direct OE replacement to match factory fabric, each color is specially formulated to match the original equipment colored top, so your Jeep will look like it came straight off the show room floor! These fabric only soft tops are designed to fit over your original factory hardware. This replacement soft top is available in black diamond.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2010-2018	Jeep	Wrangler	Rubicon
2010-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2010-2018	Jeep	Wrangler	Unlimited Rubicon
2010-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2010	Jeep	Wrangler	Unlimited X
2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport

Unlike other reusable air filters, our dry panel design never needs oiling, which keeps your mass airflow sensor from being damaged by excess oil! Rugged Ridge performance high flow filters are made from a synthetic fabric and not cotton. Cotton filters are made porous and must be oiled to trap dirt and debris. But that oil reduces air flow through the filter and it can become easily clogged. Our filters are woven from synthetic fabric to allow maximum air flow and particulate filtration. Because our filters never need oiling, they can be cleaned easily with water instead of degreaser, reducing the cost of maintaining the filter over the lifetime of your vehicle. No oil = No fuss, no mess and improved performance!

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport

Rugged Ridge Rocker Panel Body Armor is a simple and affordable way to protect that lower body p in. seam, while adding a striking off-road appeal. Built from impact-resistant polycarbonate for enhanced strength and durability, these rocker guards install easily with no drilling required. An attractive black matte finish accents OE flares and bumpers for a factory-fresh appearance, giving those dinged and dented p in. seams the makeover they rightly deserve. Sold in pairs. Available for 2 and 4-Door models.

This Part Fits:

Year	Make	Model	Submodel
2021	Jeep	Wrangler	Islander
2018-2021	Jeep	Wrangler	Rubicon
2018-2021	Jeep	Wrangler	Sport
2018-2021	Jeep	Wrangler	Sport S
2023	Jeep	Wrangler	Unlimited Freedom
2023	Jeep	Wrangler	Unlimited High Altitude
2023-2024	Jeep	Wrangler	Unlimited High Altitude 4xe
2023	Jeep	Wrangler	Unlimited High Tide
2018-2024	Jeep	Wrangler	Unlimited Rubicon
2023-2024	Jeep	Wrangler	Unlimited Rubicon 392
2023-2024	Jeep	Wrangler	Unlimited Rubicon 4xe
2024	Jeep	Wrangler	Unlimited Rubicon X
2018-2024	Jeep	Wrangler	Unlimited Sahara
2023-2024	Jeep	Wrangler	Unlimited Sahara 4xe
2023	Jeep	Wrangler	Unlimited Sahara Altitude
2018-2024	Jeep	Wrangler	Unlimited Sport
2023	Jeep	Wrangler	Unlimited Sport Altitude
2018-2024	Jeep	Wrangler	Unlimited Sport S
2023-2024	Jeep	Wrangler	Unlimited Willys
2023-2024	Jeep	Wrangler	Unlimited Willys 4xe
2023-2024	Jeep	Wrangler	Unlimited Willys Sport
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Replace your faded and damaged roll bar covers with these direct replacements from Rugged Ridge. Available in a Black OE style polyester fabric that gives the look and texture of the factory covers, these replacements are available for 2-door (13613.02) and 4-door (13613.01) models and install easily using zippers and 'hook/loop' attachment straps for a secure fitment. Rugged Ridge Roll bar Covers are also available in an upgraded premium vinyl that provides a slightly heavier material with an increased surface sheen for improved water/dirt resistance- 2 door (13613.06) and 4-door (13613.05), as well.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport

Replace your faded and damaged roll bar covers with these direct replacements from Rugged Ridge. These premium replacement roll bar covers are constructed of a durable heavy-weight vinyl fabric that provides increased water-resistance over the factory polyester fabric making them easier to keep clean and maintain in off-road conditions. Available for both 2-door (13613.06) and 4-door (13613.05) models, the premium vinyl fabric has an increased surface sheen, giving the covers an attractive dark charcoal appearance. Standard OE replacement covers are also available for 2-door (13613.02) and 4-door (13613.01)models, as well.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2018	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2018	Jeep	Wrangler	Sport
2016,2018	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2018	Jeep	Wrangler	Unlimited Rubicon
2007-2018	Jeep	Wrangler	Unlimited Sahara
2010-2018	Jeep	Wrangler	Unlimited Sport
2016,2018	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport